Viking K-1900-812L

The K-1900-812L hot-line panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard touch tone phone. The hot-line unit will touch tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-812L hot-line phone features a 12″ armored cable with an internal stainless steel lanyard for increased strength and vandal resistance. The phone housing consists of a heavy gauge stainless steel panel, metal touch tone keypad, armored cable, heavy duty handset, and all metal cradle. The K-1900-812L hot-line panel phone can be easily touch tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor installations where the unit is exposed to precipitation or condensation, use model K-1900-812L-EWP.

Core Features:

• Vandal Resistant Features:
  • 14 gauge 316 stainless steel panel with permanent laser etched graphics
  • Armored handset cable
  • Metal cradle
  • Heavy duty metal keypad
  • Hex drive mounting screws
• Weather Resistant Features:
  • Marine grade 316 stainless steel faceplate and screws
  • Internally sealed keypad
• Auto dials one programmable speed dial number (up to 32 digits)
• Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
• Touch tone or pulse dialing
• Non-volatile memory, no batteries required
• Operates on analog PABX and key system extensions or analog Centrex and CO lines
• Programmable 6 digit security code
• Touch tone programmable
• Armored 12″ handset cable with an internal stainless steel lanyard for additional cable strength
• Programmable pre-dial pause
• Blocks fraudulent calls from hand held pocket dialers
• Limited toll restriction in standard touch tone phone mode
• Hearing aid compatible amplified handset with sealed push button volume control
• Programmable default volume level
• Programmable volume control disable
• Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
• Flush mount using the included rough-in box or surface mount using a Viking VE-5×10 Surface mount box (not included)